Description

Adjustable Distance Sensor E3F-DS30C4 – NPN NO 6-36V 3A

The E3F-DS30C4 distance sensor has a 100 cm cable and nuts for easy installation. When an object is detected, a low state appears on the output – 0V. We can adjust the distance from 10 to 30 cm with a knob on the back of the sensor. When nothing is closer than the set value then the sensor sends a high state Vcc= supply voltage. The sensor is equipped with reverse power connection protection. We can connect the photoelectric switch to the leads of microcontrollers such as AVR, STM32 or kits Arduino and Raspberry Pi.

Popular proximity sensor can be used in many DIY projects and even industrial devices. in the range of 10 to 30 cm.

• Supply voltage: 6-36V
• Current consumption: less than 300 mA
• Measuring range adjustable: from 0 to 30 cm
• Range adjustment knob – multi-turn potentiometer
• Output signal: digital (low state in case – object detected, when object not detected – high state)
• LED to indicate object detection
• Transistor: NPN
• Channel: NO
• Response time: less than 2 ms
• Protection against reverse polarity
• Operating temperature: -25 °C to +55 °C
• Diameter: 18 mm
• Sensor length: 62 mm

Video materials

Included

• Adjustable Distance Sensor E3F-DS30C4 – NPN NO 6-36V 3A – 1pc.

Connecting

• Red or brown wire Vcc
• Green or blue wire – ground – GND
• Yellow or black wire – digital output – OUT
• no object – high state
• object detection – low state